The important link of sample production;
A) Cutting, pay attention to the direction of fabric cutting pieces and silk track, check the number of samples, and record the layout
Fabric width, single material
Rate, cut pieces complete, cut and sample check, no error:
B) It is difficult for the sampler to analyze the technical points of the style in detail after receiving the production order and sample cutting
Point, key, famous species and accessories)
The sampler found that the design could not be sewn or had good suggestions in the process of making, and
Design and communication together to solve, but under normal circumstances can not change the design effect. To avoid giving samples
The effect was beyond repair.
The use of ingredients, design the processing method of sewing process, and strive to achieve simple process
Principle, suitable for mass production. In the discovery of the length of the sample, the size of the difference can not be stitched, to reflect the plate division in time, need
To modify the length, ask the edition division to modify,
When modifying the cut, it must also be on the sample
If the sample is modified, the sample is not in conformity with the sample, which is found to be serious in the production of the garment
The sampler and the patterner are equally responsible.
D) After the sample is completed, carefully check whether there is any omission. The appearance should be clean, the production should be fine, and the open line should not jump
Line, loose line, lost line wireless head, dead fold, dirty residual, damaged, smooth trace, inside, face flat, left and right
Symmetrical, specifications meet the design requirements.
F) The production of different samples for mass production, to achieve the best effect, need to modify many times, but one
Problems try to be in place in a modification, the requirements of the second modification and the second modification can not appear the same problem, a
As usual, the process must be complete to achieve the standard effect of the second sample
